• TECHKNOW
  • TECHKNOW

    Resize
    Dock/Undock
    NEW FAQ ADDED
    X
    Naša web stranica koristi kolačiće i druge tehnologije kako bi osigurali najbolje iskustvo pretraživanja.

    Postavke kolačića možete u bilo kom trenutku promeniti.

    Saznajte više o tome kako koristimo kolačiće.

    Medium Diameter Face Machining Systems

    Tool: HFHR/L…
    Insert: HFPR/L...

    W = 3-6 mm
    Tmax = 32 mm
    Min. dia. = 25 mm

    Integral shank toolholder which uses double-ended 3 mm inserts. Used for face grooving and face turning of small parts, for 12 mm minimum groove diameter.
    Tool: HFPAD…
    Insert: HFPR/L…

    W = 3-6 mm
    Tmax = 22 mm
    Min. dia. = 25 mm

    Slanted, screw-clamped adapter, used with HELIFACE and GRIP inserts. A part of the MODULAR-GRIP system. Very rigid, for tough face operations.
    Tool: SGFFR/L
    Insert: GFF…

    W = 2-6 mm
    Tmax = 30 mm
    Min. dia. = 25 mm

    Integral toolholders which use SELF-GRIP inserts. Recommended for face grooving only. Excellent chip evacuation.
    Tool: HFFR/L…
    Insert: HFPR/L…

    W =4-6 mm
    Tmax = 38 mm
    Min. dia. = 48 mm

    Economical, double-ended blades which use HELIFACE and GRIP inserts. Recommended for deep face grooving and face turning to a maximum depth of 38 mm.
    Tool: SGFFA R/L
    Insert: GFF…

    W = 2-6 mm
    Tmax = 40 mm
    Min. dia. = 25 mm

    Reinforced blades which use SELF-GRIP inserts. Recommended for face grooving only, can machine along shaft. Excellent chip evacuation.
    Tool: HFHR/L..-M
    Insert: HFPR/L…

    W = 3-6 mm
    Tmax = 5 mm
    Min. dia. = 20 mm

    Integral toolholders, used with HELIFACE and GRIP inserts. For machining up to 5 mm depth. 3–6 mm wide inserts can be mounted in the same pocket.
    Tool: HFAIR/L..& HGAIR/L
    Insert: HFPR/L…

    W = 3-6 mm
    Tmax = 12 mm
    Min. dia. = 32 mm

    Exchangeable, internal coolant, internal adapters. Used with HELIFACE and GRIP inserts. Recommended for deep internal face machining.
    Tool: HFIR/L..-MC
    Insert: HFPR/L…

    W = 3-6 mm
    Tmax = 5 mm
    Min. dia. = 20 mm

    Boring bars for shallow face machining of up to 5 mm depth. Used with HELIFACE and GRIP inserts. Internal coolant. 3–6 mm width inserts can be mounted on the same pocket.
    © ISCAR LTD. Manufacturer of Metalworking Tools (Iscar.com) All Rights Reserved