Page 39 - Demo

SQUARE SHOULDER ENDMILLS37OAL LFDC DCONMS DCXDRVSAPMXTHSZMS17%u02daRd%u00b0Designation DCX(1) DC APMX CICT(2) THSZMS LF OAL DCONMS DRVS(3) RMPX%u00b0(4) MDN(5) MDX(6) CSP(7) MIID(8) kgFF EWX D16-2-MMT10-04 16.00 8.60 0.80 2 T10 19.50 30.81 15.20 12.0 5.0 24.60 31.00 1 H600 WXCU 040310HP 0.02FF EWX D20-3-MMT12-04 20.00 12.60 0.80 3 T12 25.00 38.80 18.80 15.0 4.8 32.60 39.00 1 H600 WXCU 040310HP 0.05FF EWX D25-4-MMT15-04 25.00 17.60 0.80 4 T15 30.00 47.00 23.90 19.0 3.3 42.60 49.00 1 H600 WXCU 040310HP 0.10FF EWX D25-3-MMT15-05 25.00 15.00 1.00 3 T15 30.00 47.00 23.90 19.0 5.0 40.00 49.00 1 H600 WXCU 05T312T 0.09%u2022 Do not apply lubricant to the MULTI-MASTER threaded connection %u2022 To generate a straight surface without cusps, the width of cut must not exceed DC %u2022 For adaptation options, see page 9(1) Cutting diameter maximum (2) Number of inserts (or edges for solid tool) (3) Width across flats (wrench should be ordered separately) (4) Maximum ramping angle (5) Machinable diameter minimum for interpolation (6) Machinable diameter maximum for interpolation (7) 0 - Without coolant supply, 1 - With coolant supply (8) Master insert identification For inserts: H600 WXCU For holders, see pages: MM CAB-T-T (97) %u2022 MM CAB-T-T-W (97) %u2022 MM S-A (stepped shanks) (90) %u2022 MM S-A (straight shanks) (93) %u2022 MM S-A-AV (90) %u2022 MM S-A-BT (97) %u2022 MM S-A-C# (96) %u2022 MM S-A-HSK (96) %u2022 MM S-A-N (92) %u2022 MM S-A-SK (96) %u2022 MM S-B (85%u00b0 conical shanks) (93) %u2022 MM S-D (89%u00b0 conical shanks) (94) %u2022 MM S-ER (95) %u2022 MM S-ER-H (95) %u2022 MM TS-A (92) %u2022 MM TS2-A (90)Spare PartsDesignationFF EWX D16-2-MMT10-04 SR M2.5X6-T7-60 T-7/51FF EWX D20-3-MMT12-04 SR M2.5X6-T7-60 T-7/51FF EWX D25-4-MMT15-04 SR M2.5X6-T7-60 T-7/51FF EWX D25-3-MMT15-05 SR 10508600 T-9/51FF EWX-MMFast Feed Endmills with MULTI-MASTER Threaded Connection That Mount Double-Sided Inserts with 6 Cutting EdgesTHSZMS DCONMSLF OALAPMX 17%u02da DRVSDCX DC Rd%u00b0Designation DCX(1) DC CICT(2) APMX AE(3) THSZMS LF OAL DCONMS RMPX%u00b0(4) MDN(5) MDX(6) DRVS(7) MIID(8) TQ(9) CSP(10) kgFFX4 ED16/.63-2-MMT10-04 16.00 8.60 2 0.80 3.7 T10 20.00 31.30 15.20 4.3 24.60 31.00 13.0 FFX4 XNMU 040310T 0.9 1 0.02FFX4 ED20/.78-3-MMT12-04 20.00 12.60 3 0.80 3.7 T12 25.00 38.30 18.80 2.7 32.60 39.00 15.0 FFX4 XNMU 040310T 0.9 1 0.04FFX4 ED25/.98-4-MMT15-04 25.00 17.60 4 0.80 3.7 T15 30.00 47.00 24.00 1.8 42.60 49.00 19.0 FFX4 XNMU 040310T 0.9 1 0.14FFX4 ED32/1.26-5-MMT21-04 32.00 24.60 5 0.80 3.7 T21 35.00 58.10 29.00 1.2 56.60 63.00 24.0 FFX4 XNMU 040310T 0.9 1 0.19FFX4 ED040-6-MMT21-04 40.00 32.60 6 0.80 3.7 T21 40.00 63.10 30.00 0.9 72.60 79.00 24.0 FFX4 XNMU 040310T 0.9 1 0.27%u2022 To generate a straight surface without cusps,the width of cut must not exceed DC %u2022 Radius for programming: for insert XNMU 1.8 mm, for insert XNMW 1.72 mm(1) Cutting diameter maximum (2) Number of inserts (or edges for solid tool) (3) Maximum plunging width (4) Maximum ramping angle (5) Machinable diameter minimum for interpolation (6) Machinable diameter maximum for interpolation (7) Torque key size (8) Master insert identification (9) Recommended tightening torque (N*m) for insert screw (10) 0 - Without coolant supply, 1 - With coolant supply For inserts: FFX4 XNMU/W-04 For holders, see pages: MM CAB-T-T (97) %u2022 MM CAB-T-T-W (97) %u2022 MM S-A (stepped shanks) (90) %u2022 MM S-A (straight shanks) (93) %u2022 MM S-A-AV (90) %u2022 MM S-A-BT (97) %u2022 MM S-A-C# (96) %u2022 MM S-A-HSK (96) %u2022 MM S-A-N (92) %u2022 MM S-A-SK (96) %u2022 MM S-B (85%u00b0 conical shanks) (93) %u2022 MM S-D (89%u00b0 conical shanks) (94) %u2022 MM S-ER (95) %u2022 MM S-ER-H (95) %u2022 MM TS-A (92) %u2022 MM TS2-A (90)Spare PartsDesignationFFX4 ED-MM SR M2.5X6-T7-60 T-7/51FFX4 ED-MMEndmills with MULTI-MASTERAdaptation that Mount Small \Inserts with 4 Cutting Edges for Fast Feed Milling