Page 10 - HOLE MAKING CATALOG p149-184
P. 10
SOLID CARBIDE DRILLS CHWx30˚
SCCD-ACP3 DCm7 140˚ LU DCONMSh6
Three Flute Solid Carbide LS
Drills with Coolant Holes, PL LCF OAL
Drilling Depth 3xD
Dimensions
Designation DC DCONMS LU LCF OAL LS PL KCH CHW FTDZ(1) IC908
4.00 6.00 17.0
SCCD 040-017-060 ACP3 4.50 6.00 17.0 25.0 66.00 35.0 0.820 30.0 0.30 •
SCCD 045-017-060 ACP3 5.00 6.00 20.0 •
SCCD 050-020-060 ACP3 5.10 6.00 20.0 25.0 66.00 35.0 0.880 30.0 0.30 •
SCCD 051-020-060 ACP3 5.50 6.00 20.0
SCCD 055-020-060 ACP3 6.00 6.00 20.0 29.0 66.00 36.0 0.960 30.0 0.30 M6 •
SCCD 060-020-060 ACP3 6.50 8.00 24.0
SCCD 065-024-080 ACP3 6.80 8.00 24.0 29.0 66.00 36.0 0.980 30.0 0.30 M7 •
SCCD 068-024-080 ACP3 7.00 8.00 24.0
SCCD 070-024-080 ACP3 7.50 8.00 29.0 29.0 66.00 36.0 1.080 30.0 0.40 •
SCCD 075-029-080 ACP3 8.00 8.00 29.0
SCCD 080-029-080 ACP3 8.50 10.00 35.0 29.0 66.00 36.0 1.170 30.0 0.40 •
SCCD 085-035-100 ACP3 8.60 10.00 35.0
SCCD 086-035-100 ACP3 9.00 10.00 35.0 35.0 79.00 36.0 1.260 30.0 0.40 •
SCCD 090-035-100 ACP3 9.50 10.00 35.0
SCCD 095-035-100 ACP3 10.00 10.00 35.0 35.0 79.00 36.0 1.310 30.0 0.40 M8 •
SCCD 100-035-100 ACP3 10.30 12.00 40.0
SCCD 103-040-120 ACP3 10.50 12.00 40.0 35.0 79.00 36.0 1.350 30.0 0.40 •
SCCD 105-040-120 ACP3 11.00 12.00 40.0
SCCD 110-040-120 ACP3 11.50 12.00 40.0 42.0 79.00 36.0 1.400 30.0 0.40 •
SCCD 115-040-120 ACP3 12.00 12.00 40.0
SCCD 120-040-120 ACP3 42.0 79.00 36.0 1.490 30.0 0.40 M10 •
48.0 89.00 40.0 1.630 30.0 0.50 •
48.0 89.00 40.0 1.650 30.0 0.50 •
48.0 89.00 40.0 1.720 30.0 0.50 M11 •
48.0 89.00 40.0 1.750 30.0 0.50 •
48.0 89.00 40.0 1.850 30.0 0.50 •
55.0 102.00 45.0 1.940 30.0 0.60 •
55.0 102.00 45.0 1.980 30.0 0.60 •
55.0 102.00 45.0 2.070 30.0 0.60 •
56.0 102.00 45.0 2.120 30.0 0.60 M14 •
56.0 102.00 45.0 2.210 30.0 0.60
• For user guide, see pages 175-184 • For regrinding instructions, see page 182
(1) Used for standard thread size
Recommended Machining Conditions for SCCD-ACP Solid Carbide Drills
ISO Material Cutting Cutting Diameter
No. Material Material Condition Speed Ø4-Ø5 Feed f, mm/rev
Vc, m/min 0.15-0.25 Ø5.1-Ø6 Ø6.1-Ø8 Ø8.1-Ø10 Ø10.1-Ø12
1 < 0.25 %C Annealed 80-140 0.15-0.20
80-130 0.20-0.30 0.25-0.45 0.30-0.55 0.35-0.60
2 Non-alloy steel >= 0.25 %C Annealed 80-120 0.20-0.35
70-110
3 and cast steel, < 0.55 %C Quenched and tempered 50-90 0.25-0.40 0.30-0.50 0.35-0.55
80-120
4 free cutting steel >= 0.55 %C Annealed 70-110 0.20-0.30 0.25-0.35 0.30-0.45 0.35-0.50
50-90 0.25-0.45 0.35-0.55 0.40-0.60 0.45-0.65
5 Quenched and tempered 40-70
50-90 0.20-0.40 0.30-0.50 0.35-0.55 0.40-0.60
P 6 Low alloy steel and cast Annealed 40-80
7 steel (less than 5% of Quenched and tempered 80-140
8 alloying elements) 70-120
9 80-120
70-110
10 High alloyed steel, cast Annealed 80-120
70-110
11 steel, and tool steel Quenched and tempered
15 Grey cast iron Ferritic/pearlitic
16 Pearlitic
K 17 Nodular cast iron Ferritic
18 Pearlitic
19 Malleable cast iron Ferritic
20 Pearlitic
158 ISCAR