Customized Items ×
Choose an item to customize and generate a quotation
  
GHGR/L : External holders for deep grooving and parting
Representative Image
Left-hand shown
 
Representative Image
Left-hand shown
 
  Designation  GIFUT5CWN  CWX  CUTDIA  CDX H HF B OAL LH WF WB HBH HAND MINI APMX CCMS CSP  CW KAPR Tool typGICATGIREMgiic
  GHGL 20-2      00.402.4034.017.00~20.020.020.0120.0033.019.201.70-L-~2.40~VKT01A2020~~~~SQUARE~2800609 In the case of inserts with CW<2 mm, tool pocket should be ground to 0.3 mm thinner than the insert's grooving width. 0
  GHGR 20-2      00.402.4034.017.00~20.020.020.0120.0033.019.201.70-R-~2.40~VKT01A2020~~~~SQUARE~2800608 In the case of inserts with CW<2 mm, tool pocket should be ground to 0.3 mm thinner than the insert's grooving width. 0
  GHGL 25-2      00.402.4034.017.00~25.025.025.0140.0033.024.201.70-L-~2.40~VKT01A2525~~~~SQUARE~2800605 In the case of inserts with CW<2 mm, tool pocket should be ground to 0.3 mm thinner than the insert's grooving width. 0
  GHGR 25-2      00.402.4034.017.00~25.025.025.0140.0033.024.201.70-R-~2.40~VKT01A2525~~~~SQUARE~2800604 In the case of inserts with CW<2 mm, tool pocket should be ground to 0.3 mm thinner than the insert's grooving width. 0
  GHGL 16-3    03.004.0040.020.00~16.016.016.0110.0036.014.702.504.0LMain Spindle~4.00~VKT01A1616~~~~SQUARE~2800233 0
  GHGR 16-3    03.004.0040.020.00~16.016.016.0110.0036.014.702.50-RMain Spindle~4.00~VKT01A1616~~~~SQUARE~2800259 0
  GHGL 16-3 ST      03.004.0034.017.00~16.016.016.078.0033.015.002.404.0LMain Spindle~4.00~VKT01A1212~~~~SQUARE~2861192 For Star and multi-spindle machines. 0
  GHGR 16-3 ST      03.004.0034.017.00~16.016.016.078.0033.015.002.404.0RMain Spindle~4.00~VKT01A1616~~~~SQUARE~2800260 For Star and multi-spindle machines. 0
  GHGL 20-3    03.004.0040.020.00~20.020.020.0120.0036.018.702.50-L-~4.00~VKT01A2020~~~~SQUARE~2800238 0
  GHGR 20-3    03.004.0040.020.00~20.020.020.0120.0036.018.702.50-R-~4.00~VKT01A2020~~~~SQUARE~2800263 0
  GHGL 25-3    03.004.0040.020.00~25.025.025.0140.0036.023.702.50-L-~4.00~VKT01A2525~~~~SQUARE~2800245 0
  GHGR 25-3    03.004.0040.020.00~25.025.025.0140.0036.023.702.50-R-~4.00~VKT01A2525~~~~SQUARE~2800270 0
  GHGR 16-4    04.005.0040.020.00~16.016.016.0110.0036.014.403.204.0R-~5.00~VKT01A1616~~~~SQUARE~2800777 0
  GHGL 20-4    04.005.0040.020.00~20.020.020.0120.0036.018.203.50-L-~5.00~VKT01A2020~~~~SQUARE~2800240 0
  GHGR 20-4    04.005.0040.020.00~20.020.020.0120.0036.018.203.50-R-~5.00~VKT01A2020~~~~SQUARE~2800265 0
  GHGL 25-4    04.005.0040.020.00~25.025.025.0140.0036.023.203.50-L-~5.00~VKT01A2525~~~~SQUARE~2800247 0
  GHGR 25-4    04.005.0040.020.00~25.025.025.0140.0036.023.203.50-R-~5.00~VKT01A2525~~~~SQUARE~2800272 0
  GHGL 25-425    04.005.0050.025.00~25.025.025.0140.0041.023.203.50-L-~5.00~VKT01A2525~~~~SQUARE~2800650 0
  GHGR 25-425    04.005.0050.025.00~25.025.025.0140.0041.023.203.50-R-~5.00~VKT01A2525~~~~SQUARE~2800649 0
  GHGL 25-5    05.006.4050.025.00~25.025.025.0140.0041.022.904.20-L-~6.40~VKT01A2525~~~~SQUARE~2800249 0
  GHGR 25-5    05.006.4050.025.00~25.025.025.0140.0041.022.904.20-R-~6.40~VKT01A2525~~~~SQUARE~2800274 0
  GHGL 32-5    05.006.4050.025.00~32.032.032.0150.0041.029.904.20-L-~6.40~VKT01A3232~~~~SQUARE~2800253 0
  GHGR 32-5    05.006.4050.025.00~32.032.032.0150.0041.029.904.20-R-~6.40~VKT01A3232~~~~SQUARE~2800278 0
  GHGL 25-630    06.008.0060.030.00~25.025.025.0140.0045.022.305.40-L-~8.00~VKT01A2525~~~~SQUARE~2800648 0
  GHGR 25-630    06.008.0060.030.00~25.025.025.0140.0045.022.305.40-R-~8.00~VKT01A2525~~~~SQUARE~2800647 0
  GHGL 32-632    06.008.0064.032.00~32.032.032.0170.0050.029.405.40-L-~8.00~VKT01A3232~~~~SQUARE~2800779 0
  GHGR 32-632    06.008.0064.032.00~32.032.032.0170.0050.029.405.40-R-~8.00~VKT01A3232~~~~SQUARE~2800778 0
For machining depth over 13 mm, a single-ended insert is required (GIM, GIMF,GIMY,GIMT,GIMN)
CDX for grooving depth depends on part diameter Dmax
For grooving a part with a diameter larger than CUTDIA, click on "More Info"
For using TIP and GIVR/L inserts, tool holder seat needs to be modified according to insert profile to ensure clearance
For key blades and adjustable torque handles information (optional), click on "More Info"


Site Map

Groove-Turn & Parting  ISO-Turning   Threading   Milling   Hole Making   Reaming   Boring   Tooling Systems   Modular Adaptations  Multifunction Tools 

Terms of Use and Legal Disclaimer   Privacy Statement
© 2024 ISCAR LTD. Manufacturer of Metalworking Tools (Iscar.com) All Rights Reserved